View TFS211C_1324486.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS211C.doc
Version 2.0
25.01.2001
VI TELEFILTER
Measurement condition
Ambient temperature: Input power level: terminating impedances balanced input: balanced output: 20 ... 25 52
Filter specification
TFS 211 C
1/5
C dBm
1,1 k || -5.1pF 1,1 k || -5.2pF
Characteristics
Remark: Reference level for the relative attenuation arel of the TFS211C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level relative to the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss
ae = amin
typ. value
6 ... 7 dB
limit
min. max. 4,5 8 211 dB dB MHz
Nominal frequency Centre frequency
fN fc
211 MHz
arel Relative attenuation fN - 200 kHz ... fN + 200
kHz MHz MHz MHz MHz GHz GHz GHz GHz
0,5 dB 35 30
max. min. min. min. min. min. min.
1 30 10 20 30 45 40
dB dB dB dB dB dB dB
fN fN fN fN
1 600 1,2 + 1,8 + 7,0 1,0 2,0 3,0
MHz kHz MHz MHz MHz GHz GHz GHz
... fN ... fN ... fN ... fN + ... ... ... ...
1,8 1,2 1,8 7,0 1,0 2,0 3,0 4,0
dB dB
Group delay ripple GD fN - 200 kHz ... fN + 200 kHz Input power level Permissible DC voltage Operating temperature range Storage temperature range Temperature coefficient Frequency inversion temperature
TC To
-
max.
max. 350 max. + 10 max. 10
ns dBm V
2)
- 35 C ... + 85 C - 35 C ... + 85 C - 0,036 ppm/K 25 C
1)
-
Note 1) - f (Hz) = TC (ppm/K) x (T - To) x FTo (MHz) Note 2) If the filter is used between -10C and -35C all given frequencies may be changed down to max. - 30 kHz
Generated: Checked / approved:
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS211C.doc
Version 2.0
25.01.2001
VI TELEFILTER
Filter specification
TFS 211 C
2/5
Construction and pin connection (All dimensions in mm)
8 9 10
7
6 5 4
TFS 211 C tft M04
1 2 3
1 2 3 4 5 6 7 8 9 10
Ground Ground Ground Balanced output Balanced output Ground Ground Ground Balanced input Balanced input
50 test circuit
1:1
L1
9
4
L4
1:1 Output 50 Ohm
Input 50 Ohm
L3 L2 10
SAW
5
L6 L5
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS211C.doc
Version 2.0
25.01.2001
VI TELEFILTER
Stability characteristics
Filter specification
TFS 211 C
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer
Tape (all dimensions in mm) W Po Do E : : : : 16 0,3 4 0,1 1,5 + 0,1 1,75 0,1 7,5 0,1 0,60 2 8 1,5 5,30 9,70 13,5 0,1 0,1 0,2 0,2 0,1
COVER TAPE P1 CT Bo
3000 min 300 mm min 500 mm min 300 mm
EMBOSSED CARRIER TAPE
Do
Po
P2
E Ao F W
F : G (min) : P2 : P1 : D1(min) : Ao : Bo CT : :
D1
G
W2
Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 16,40 +2,0 22,4 50
C A
13,0
0,5/-0.2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS211C.doc
Version 2.0
25.01.2001
VI TELEFILTER
Filter specification
TFS 211 C
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS211C.doc
Version 2.0
25.01.2001
VI TELEFILTER
History
Filter specification
TFS 211 C
5/5
Version 2.0
Reason of Changes generate detailled specification - add terminating impedances - add matching circuit - add tape and reel dimensions, stability characteristics and reflow profile
Name Steiner
Date 24.01.2001
VI TELEFILTER Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com
Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS211C

	To Download TFS211C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .